设置

Choose language

MX231 Sewing Machine Guide? 3 文章, 3 作家, 4 读者, 已开始 25 月前

已发布 25 月前 (Saturday, March 12) 由 AndiCrew
#1
Can somebody give me a review of the MX231 sewing machine? I'm planning to get one, but I need some information beforehand.

已发布 7 月前 (Thursday, August 24),已编辑 7 月前 由 corrinpryor
#2
Not sure where else to turn...

I just got a sewing machine recently, a SINGER MX231. I had it all set up, but for whatever reason, I've had so much trouble with the damn bobbin. I've followed the instructions, I watched tutorials on YouTube about it, but it's not working properly. It can only go about a dozen strokes before seizing up, and the back/underside is a tangled, chaotic mess of wasted thread. slope game

I don't know what to do to fix it.
这个帖子有回复: ( #4 )

已发布 7 月前 (Thursday, August 24),已编辑 7 月前 由 corrinpryor
#3
文章已删除

这个帖子是回复 #2
已发布 7 月前 (Wednesday, August 30) 由 nasusjazz
#4
Hi! Try this...To test the tension on a bobbin, you can dangle the bobbin case by the thread. If the bobbin case doesn't move at all when you jerk it, the tension is too tight. If the bobbin case drops quickly, the tension is too loose. 
To test the tension, you can: 
Insert a bobbin in the bobbin case.Hold the bobbin case up by the thread.Give the thread a little jerk.If the bobbin case slides down slightly, the tension is perfect.If the bobbin case drops freely, the tension is too loose. 
If the tension isn't perfect, you can adjust the bobbin spring. If the bobbin thread shows on the upper layer, you can tighten the spring. If the needle thread shows on the underlayer, you can loosen the spring. You can make another test seam and examine the stitches until the stitch is balanced.
Hope this helps.